频闪仪的工作原理：
频闪仪是一种用于使循环移动的物体看起来静止或缓慢移动的装置。它的工作原理是灯发出短暂而快速的闪光，当闪光的频率与物体移动的频率相匹配时，物体似乎移动缓慢或静止。出于同样的原因，Stroboscope 可用于各种行业，用于各种质量控制和检查作。
LED频闪仪在钢铁工业中的应用：
在钢铁工业中，制造热轧和冷轧板、卷材等的轧机在生产过程中面临划痕、凹痕等缺陷。这些板材以至少 200 米/分钟的非常高的速度制成。因此，在生产阶段不可能发现这些缺陷。
路阳仪器设备公司 的LUYOR-906L便携式频闪仪是在生产过程中轻松检测这些缺陷的***合适设备。它的工作原理是灯发出短暂而快速的闪光，当闪光的频率与线路速度相匹配时，板材/线圈似乎移动缓慢或静止，并且很容易识别凹痕、划痕等缺陷。
LUYOR-906L便携式频闪仪的***大闪光频率为 300,000 FPM。闪光的频率和持续时间可以很容易地与生产线速度同步。LUYOR-906L便携式频闪仪使用超亮 LED，可在 1m 的距离内提供 40 x 40 cm 的均匀照明，并且可以通过组合多个单元（***多 12 个来轻松扩展该区域，以匹配您的生产线宽度。由于LUYOR-906L便携式频闪仪 使用 LED，因此无需更换灯泡，因此能耗和运行成本也较低。
总之，Stroboscope 为钢厂提供了更高的效率。通过使用这种频闪仪，钢卷轧机可以提高卷材质量的一致性，消除?；奔浜臀ぃ档湍茉闯杀静⑻岣甙踩?。
Applications in Steel Industry:
Principle:
A stroboscope is a device used to make a cyclically moving object appear to be stationary or slow- moving. It works on the principle that a lamp emits brief and rapid flashes of light, when the frequency of the flashes matches the frequency at which the object is moving, the object appears to be moving slow or stationary. For this same reason, Stroboscope can be used in various industries for various quality control and inspection operations.
Applications in Steel Industry:
In steel industry, rolling mills that make hot-rolled and cold rolled sheets, coils etc. face defects like scratches, dents etc. during the production process. These sheets are made at a very high speed of minimum 200m/min. So, there is no possibility of these defects getting identified during the production stage.
luyor instrument's LUYOR-906L portable Stroboscope is the most suitable device to detect these defects easily during the production process. It works on the principle that a lamp emits brief and rapid flashes of light, when the frequency of the flashes matches the line speed, the sheet/coil appears to be moving slow or stationary and the defects like dents, scratches can be easily identified.
LUYOR-906L has a maximum flash frequency of 300,000 FPM. The frequency and the duration of the flashes can be easily synchronized with the line speed with the help of the Controller. LUYOR-906L uses ultra-bright LEDs for uniform illumination of a range of 40 x 40 cm brightly from a distance of 1m and this area can be easily extended by combining multiple units (upto 12) of LUYOR-906L to match the width of your production line. Since LUYOR-906L uses LEDs, it also has lower energy consumption and running
costs because there is no need for lamp replacement.
In Conclusion, Stroboscope provides greater efficiency in the steel plants. By using this stroboscope, steel coil mills can improve the consistency of coil quality, eliminate downtime and maintenance, reduce energy costs, and improve safety.
